Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
Palmer
Der er 57 varer.-
Palmer PAN 02 - DI Box active
PAN02Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB....
754,75 kr -
Professional DI Box active Palmer PAN 02 PRO
PAN02PROThe Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The Groundlift switch has a "lift" position allowing adjustments between a "soft and hard grounding"...
2 164,75 kr -
19" DI Box 4-Channel active Palmer PAN 03
PAN03Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and...
3 207,75 kr -
19" DI Box 4-Channel passive Palmer PAN 03 PASS
PAN03PASSPassive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR...
2 008,50 kr -
Palmer PAN 04 - DI Box 2-Channel passive
PAN04The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can...
943,50 kr -
Reversed DI Box Palmer DI-REVERSE
PDIR01Many try using a DI-Box “backwards” in order to convert a balanced signal to unbalanced. The resulting mismatch generally leads to disappointing results. The PDIR (DI-Reverse) offers a clean and reliable solution whilst additionally isolating the two connected devices via transformer.
826,00 kr -
Palmer LI 03 - Line Isolation Box 2 Channel
PLI03Two-channel isolation transformer (line isolator). With cinch (RCA) inputs and outputs, especially designed for connection to notebooks, sound cards, hifi systems, etc. The PLI03 eliminates ground loops and interference signals that can be caused by the computer, for example.
1 170,00 kr -
Palmer MT 09 - Mic Level Split Transformer 1:1+1
PMT09Micropone split transformer, similar to PMT-05, 2 secondary windings. Electrostatic and mu-metal shielding, PCB mount. PCB for PMT-09 available (#PCB-09). Technical specifications: Ratio 1 : 1 Nominal iImpedance input and outputs: 200 ohms Frequency range: 40 Hz - 20 kHz, +/- 0,5 dB Level: + 4 dB max. Dimensions: (without pins): 30 x 30 x 20 mm
698,50 kr -
Pedalboard incl.WTPB40 Powerbar Palmer Pedalbay® 40 PB
PPEDALBAY40PBThe PPEDALBAY40PB set combines the Palmer Pedalbay 40 and the Palmer WTPB40 power supply with 8 outputs. Due to the patented integration, the power supply can be exchanged and fixed with the rear rail of the Pedalbay40. A separate transport for power supply and pedalbay is no longer necessary.
2 173,50 kr -
Palmer PAN 04 A - Active 2-Channel DI Box
PAN04AThe Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing desk’s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused by ground loops. The active switch leaves the frequency response unaffected and...
1 717,00 kr -
Palmer PAN 05 - Microphone Merger
PAN05The PAN-05 enables you to patch two microphones into one single mixing desk channel in situations where you run out of channels. Since decoupling occurs via a balanced resistor network, the PAN-05 also lets phantom power “pass through”, useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser...
575,50 kr -
19" DI/Line Isolation Box 4 Channels active Palmer PAN 08
PAN08The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear). The signal level can be attenuated by 20 dB for microphone inputs, but can...
4 007,75 kr -
19" DI Box 8 Channels passive Palmer PAN 16
PAN16The Palmer PAN16 is an 8 channel passive DI box in a 19" 1U rack format. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30...
2 912,50 kr -
Palmer PAN 48 - Phantom Power Supply 2 Channel
PAN48Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f...
1 773,75 kr -
Palmer PRMLS - Line Splitbox 4 Channel
PRMLSDesigned to split line level signals, features similar to PRM-MS with the exception of decoupling resistors to obtain the lowest possible source impedance.
3 774,00 kr -
Palmer PRMMS - Microphone Splitbox 4 Channel
PRMMSPassive splitter box for microphone signals. One module has 4 channels. Each channel has an input, an output wired in parallel for passthrough of phantom power, and two splitter transformer-isolated outputs. All outputs are also decoupled via resistors.
3 774,00 kr
