Ingen varer
Priserne er inklusiv moms
Varen er nu lagt i din kurv
Der er 0 varer i din kurv Der er 1 vare i din kurv
Power Supplies
Der er 18 varer.- 1
- 2
-
Palmer Standard 9 V Power Pack
PW9VPW 9 VPower supply for all Palmer devices with a 9 V input connector and a maximum power consumption of 500 mA.
159,00 kr -
Palmer Professional 19" Rackmount Battery Charger
PBC400AABC 400 AAKeep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are...
3 779,00 kr -
Palmer 9 V Battery Drawer for Palmer PBC Chargers
PBCDRAWER9VPBC DRAWER 9VWhether you're a stage professional or amateur, no power means no performance! That's why we've developed a charging tray for the Palmer PBC400 battery charger to ensure that your devices attached to a 9 V battery never run out of power. Measuring just under 10 cm, this practical charging tray can be easily stored in any side pocket.
149,00 kr -
Palmer AA/AAA Battery Drawer for Palmer PBC chargers
PBCDRAWERAAPBC DRAWER AAWhether you're a stage professional or amateur, no power means no performance! That's why we've developed a charging tray for the Palmer PBC400 battery charger to ensure that your devices attached to AA / AAA battery never run out of power. Measuring just under 10 cm, this practical charging tray can be easily stored in any side pocket.
139,00 kr -
Palmer Universal 12-Outlet Pedalboard Power Supply
PWT12MK2PWT 12 MK 2The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 single-isolated 9 V DC, centre-negative female pin-connector outputs. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and...
1 409,00 kr -
Palmer Universal 9V Pedalboard Power Supply 5 Outputs
PWT05MKIIPWT 05 MK 2With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MKII is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are single isolated.The PWT 05 MKII is protected against overloading and...
939,00 kr -
Palmer Universal 8-Outlet Pedalboard Power Supply
PWT08MK2PWT 08 MK2No unwanted noise, plenty of output for power-hungry pedals, and slim designThe PWT 08 MK2 power supply stands out with its slim design, which easily fits under almost any pedal boards. The total capacity of 2,000 mA is distributed over eight individually isolated 9V DC outputs.Two of the outputs are adjustable between 6 and 18 volts to simulate...
1 099,00 kr -
Palmer Universal Pedalboard Power Supply 4-Outputs
PWT04PWT 04The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
629,00 kr -
Palmer Power Supply with 8 Outputs for PEDALBAY® 40
PWTPB40WT PB 40Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs and two...
1 559,00 kr -
Palmer Power Distribution Cable for up to 6 Devices
PWC6PWC 6With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.
69,00 kr -
Palmer Professional 19" Battery Charger with 16 Varta AA...
PBC400AAV1BC400 AA V1Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA V1 battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks...
4 449,00 kr -
LD Systems Power Supply for FX 300
LDFX300PSFX 300 PSTo make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.
169,00 kr -
Palmer Universal Pedalboard Power Supply with USB
PWT12IECPWT 12 IECLeave the noise behindA pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. That's where the PWT 12 IEC comes in. With 12 high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated...
1 569,00 kr -
Palmer Universal Pedalboard Power Supply with USB
PWT06IECPWT 06 IECLeave the noise behind!A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. And that's where the PWT 06 IEC comes in. With six high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated...
1 179,00 kr -
Palmer Power Supply with 8 Outputs for PEDALBAY® 60
PWTPB60WT PB 60Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs of which two...
1 679,00 kr -
Palmer Power supply unit with 8 outputs for rack mounting
PWTPB40RKWT PB 40 RKWorking with effects units and patchbays in the studio opens up creative possibilities for discovering new sounds. If it weren't for the hassle of power supply and the accompanying cable clutter.For this very reason, Palmer® offers the Powerbar WT PB 40 RK, which you can install in a 19" rack and thus always have a 9V DC output at hand.The...
1 639,00 kr
- 1
- 2
