Ingen varer
Priserne er inklusiv moms
Audio transformer 1:1/2:1 for line signals Unshielded version with PCB connections Wideband version Change from unbalanced to balanced and vice versa Galvanic isolation to avoid/eliminate hum loops Various level adjustment possibilities when windings are arranged accordingly When installing unshielded transformers into units with interference fields...
Line/phono adapter, a stereo line source (e.g. CD player, tape deck, tuner, etc.) can be connected to an unused phono input (mag.). No power supply required. Input: 2 x RCA, 56 kΩ/1 kHz Output: 2 x RCA, 560 Ω/1 kHz Dimensions: 37 x 53 x 22 mm Weight: 50 g
Stereo phono RIAA-forstærker, for tilslutning af en pladespiller til aux- eller line-indgangen på et Hi-Fi system, en mixer eller en forstærker mv. Strømforsyning medfølger.
Audio transformer 1:1 for microphone signals, from NEUTRIK. Very compact design, e.g. also suitable for installation into connector housings Unshielded version with bare wire connections (70 mm) Wideband version Balance adjustment Galvanic isolation to avoid/eliminate hum loops Max. input voltage: 550 mV (1% THD/50 Hz) When installing unshielded...
Audio transformer 1:3/1:10 for microphone signals, from NEUTRIK. Very compact design, e.g. also suitable for installation into connector housings Unshielded version with bare wire connections (70 mm) Wideband version Balance adjustment Galvanic isolation to avoid/eliminate hum loops Max. input voltage: 350 mV/380 mV (1% THD/50 Hz) When installing...
Line-transformere Til optimal transmission af line-signaler til en mixer eller en forstærker. Forstyrrelser, der skyldes tilpasningsproblemer, fx brummelyde, undgås bedst ved brug af en transformerkobling. Indgang og udgang er her galvanisk adskilt. Alle indgange og udgange kan benyttes med 6,3 mm jacks og XLR stik, både balancerede og ubalancerede....
2-kanals 2-vejs line combiner, (4 indgange/2 udgange), fx for tilslutning af 2 signalkilder til en mixer eller forstærker. 1 galvanisk adskilt, balanceret XLR indgang (600 Ω) med ground lift for hver kanal 1 balanceret XLR direkte indgang for hver kanal 1 balanceret XLR udgang (600 Ω) for hver kanal Frekvensområde: 20-20.000 Hz Robust metalkabinet med...
2-kanals 3-vejs line splitter, (2 indgange/6 udgange), fx til tilslutning af en mixer til flere forstærkere. 1 balanceret XLR indgang (600 Ω) pr. kanal 2 galvanisk adskilte, balancerede XLR udgange (600 Ω) med ground lift switch pr. kanal 1 balanceret XLR direkte udgang pr. kanal Frekvensområde: 20-20,000 Hz Robust metalkabinet med rigtig god...
NEUTRIK XLR/6.3 mm balancing adapter/ground isolator XLR plug to 6.3 mm jack Signal will be balanced 1:1 with separated ground, interference and hum loops are prevented Galvanic isolation between input signal and output signal Input/output impedance: 200 Ω Black aluminium body With latching device For passive DI applications, e.g. from the output of an...
NEUTRIK XLR/RCA balancing adapter/ground isolator XLR plug to RCA jack Signal will be balanced 1:1 with separated ground, interference and hum loops are prevented Galvanic isolation between input signal and output signal Input/output impedance: 200 Ω Black aluminium body For passive DI applications, e.g. from the output of a mixer to a power amplifier...
Wall-mounted remote control panel, for digital matrix router DRM-882LAN. 3 operating modes: system setup, master and zone Momentary push-buttons to select the 6 presets of the DRM-882LAN Volume control for each zone Gain control Source selection for each zone Auto standby (selectable) Lock mode LCD with 2 x 20 characters Connection to DRM-882LAN via...
2-channel audio balancing transformer An unbalanced audio signal is passively converted (without power supply) into a balanced signal by means of an audio transformer (doubled in the device). In addition, a DIP switch can be used to generate a mono signal (lossless, because it is not coupled via resistors) from two input signals (stereo). The device can...
Audio signal switch-on delay When switching an audio system with audio players, preamplifier and power amplifier on and off via a central switch, loud crackling or even a pop-like noise may occur and be heard from the connected speakers. This is caused by a charge potential passing through electrolytic capacitors in the signal path of the preamplifier...