Ingen varer
Priserne er inklusiv moms
Audio transformer 1:1/2:1 for line signals Unshielded version with PCB connections Wideband version Change from unbalanced to balanced and vice versa Galvanic isolation to avoid/eliminate hum loops Various level adjustment possibilities when windings are arranged accordingly When installing unshielded transformers into units with interference fields...
Line/phono adapter, a stereo line source (e.g. CD player, tape deck, tuner, etc.) can be connected to an unused phono input (mag.). No power supply required. Input: 2 x RCA, 56 kΩ/1 kHz Output: 2 x RCA, 560 Ω/1 kHz Dimensions: 37 x 53 x 22 mm Weight: 50 g
Stereo phono RIAA-forstærker, for tilslutning af en pladespiller til aux- eller line-indgangen på et Hi-Fi system, en mixer eller en forstærker mv. Strømforsyning medfølger.
DI transformer 10:1 Unshielded version with PCB connections Wideband version Change from unbalanced to balanced and vice versa Galvanic isolation to avoid/eliminate hum loops Max. input voltage: 5 V (1% THD/40 Hz) When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to...
Audio transformer 1:1 for microphone signals, from NEUTRIK. Very compact design, e.g. also suitable for installation into connector housings Unshielded version with bare wire connections (70 mm) Wideband version Balance adjustment Galvanic isolation to avoid/eliminate hum loops Max. input voltage: 550 mV (1% THD/50 Hz) When installing unshielded...
Audio transformer 1:3/1:10 for microphone signals, from NEUTRIK. Very compact design, e.g. also suitable for installation into connector housings Unshielded version with bare wire connections (70 mm) Wideband version Balance adjustment Galvanic isolation to avoid/eliminate hum loops Max. input voltage: 350 mV/380 mV (1% THD/50 Hz) When installing...
DI-boxe Til optimal transmission af signaler fra musikinstrumenter til en mixer eller forstærker. Forstyrrelser, der skyldes tilpasningsproblemer, fx brum, undgås bedst ved brug af en transformerkobling. Indgang og udgang er her galvanisk adskilt. Til line-enheder benyttes LTR-serien! DI-box Niveaukontrol (0/-20/-40 dB) Ground lift Feed-through udgang...
Line-transformere Til optimal transmission af line-signaler til en mixer eller en forstærker. Forstyrrelser, der skyldes tilpasningsproblemer, fx brummelyde, undgås bedst ved brug af en transformerkobling. Indgang og udgang er her galvanisk adskilt. Alle indgange og udgange kan benyttes med 6,3 mm jacks og XLR stik, både balancerede og ubalancerede....
Elektronisk stereodelefilter Subwoofer-/satellitdrift Ekstra mono subwoofer udgang Udgangsniveau kan justeres individuelt for hvert frekvensområde Justerbar fase for subwoofer udgang Justerbart delefilter Ground lift Tilslutning 6,3 mm jacks, ubalancerede
Grafisk equalizer 2-kanals version, 2 x 15 frekvensbånd af 2/3 oktav ±6 eller ±12 dB Peak LED Low cut filter Total volumenkontrol Bypass og ground lift Valg af frekvensbånd via centre click Indgange og udgange via 2 x XLR og 2 x 6,3 mm jack
DI-boxe Til optimal transmission af signaler fra musikinstrumenter til en mixer eller forstærker. Forstyrrelser, der skyldes tilpasningsproblemer, fx brum, undgås bedst ved brug af en transformerkobling. Indgang og udgang er her galvanisk adskilt. Til line-enheder benyttes LTR serien! 2-kanals DI-box Niveaukontrol (0/-20/-40 dB) for hver kanal Ground...
2-kanals 2-vejs line combiner, (4 indgange/2 udgange), fx for tilslutning af 2 signalkilder til en mixer eller forstærker. 1 galvanisk adskilt, balanceret XLR indgang (600 Ω) med ground lift for hver kanal 1 balanceret XLR direkte indgang for hver kanal 1 balanceret XLR udgang (600 Ω) for hver kanal Frekvensområde: 20-20.000 Hz Robust metalkabinet med...
2-kanals 3-vejs line splitter, (2 indgange/6 udgange), fx til tilslutning af en mixer til flere forstærkere. 1 balanceret XLR indgang (600 Ω) pr. kanal 2 galvanisk adskilte, balancerede XLR udgange (600 Ω) med ground lift switch pr. kanal 1 balanceret XLR direkte udgang pr. kanal Frekvensområde: 20-20,000 Hz Robust metalkabinet med rigtig god...
NEUTRIK XLR/6.3 mm balancing adapter/ground isolator XLR plug to 6.3 mm jack Signal will be balanced 1:1 with separated ground, interference and hum loops are prevented Galvanic isolation between input signal and output signal Input/output impedance: 200 Ω Black aluminium body With latching device For passive DI applications, e.g. from the output of an...
NEUTRIK XLR/RCA balancing adapter/ground isolator XLR plug to RCA jack Signal will be balanced 1:1 with separated ground, interference and hum loops are prevented Galvanic isolation between input signal and output signal Input/output impedance: 200 Ω Black aluminium body For passive DI applications, e.g. from the output of a mixer to a power amplifier...